熱塑性丁苯橡膠是一種高強度、高耐熱性的彈性材料，常用于制造O型密封圈、密封墊片、管道接頭等密封產品。氫氧化鉀廠家提醒，有關人員在使用熱塑性丁苯橡膠時，需要注意以下幾點，避免對其性能和壽命造成影響：

Thermoplastic styrene butadiene rubber is a high-strength and heat-resistant elastic material commonly used in the manufacturing of sealing products such as O-ring seals, sealing gaskets, and pipeline joints. Potassium hydroxide manufacturers remind relevant personnel to pay attention to the following points when using thermoplastic styrene butadiene rubber to avoid affecting its performance and lifespan:

避免與油類或有機溶劑接觸：熱塑性丁苯橡膠對油類或有機溶劑具有一定的溶脹性，長時間接觸會使其性能發生變化，導致密封不良或失效。

Avoid contact with oil or organic solvents: Thermoplastic styrene butadiene rubber has a certain degree of swelling ability towards oil or organic solvents, and long-term contact can cause changes in its performance, leading to poor sealing or failure.

避免高溫環境：雖然熱塑性丁苯橡膠具有較高的耐熱性，但在高溫環境下長時間使用會使其性能下降，嚴重時還可能導致熱塑性丁苯橡膠變形或熔化。

Avoid high temperature environments: Although thermoplastic styrene butadiene rubber has high heat resistance, prolonged use in high temperature environments can lead to a decrease in its performance, and in severe cases, it may also cause deformation or melting of thermoplastic styrene butadiene rubber.

避免環境中含有強酸、強堿或氧化劑等化學物質：熱塑性丁苯橡膠容易被強酸、強堿或氧化劑等化學物質腐蝕，導致其失去彈性或變硬。

Avoid chemicals such as strong acids, alkalis, or oxidizing agents in the environment: Thermoplastic styrene butadiene rubber is easily corroded by chemicals such as strong acids, alkalis, or oxidizing agents, causing it to lose elasticity or become hard.

注意存儲條件：熱塑性丁苯橡膠在存儲條件不當?shù)那闆r下會被氧化，導致性能下降。因此需要在陰涼、干燥、不受陽光直射的地方存放，并避免受到潮濕、高溫、酸堿等影響。

Pay attention to storage conditions: Thermoplastic styrene butadiene rubber can be oxidized under improper storage conditions, leading to a decrease in performance. Therefore, it is necessary to store in a cool, dry place that is not directly exposed to sunlight, and to avoid being affected by moisture, high temperature, acidity, and alkalinity.

總之，在使用熱塑性丁苯橡膠時，需要注意避免與油類、有機溶劑、強酸、強堿、氧化劑等化學物質接觸，避免高溫環境和不當?shù)拇鎯l件，以確保其佳性能和使用壽命。歡迎您隨時來我們網站http://www.fahao168.com咨詢！

In summary, when using thermoplastic styrene butadiene rubber, attention should be paid to avoiding contact with chemicals such as oils, organic solvents, strong acids, alkalis, oxidizing agents, etc., avoiding high-temperature environments and improper storage conditions to ensure its excellent performance and service life. Welcome to our website anytime http://www.fahao168.com consulting service