我們知道氫氧化鉀的用途很廣，但是工業氫氧化鉀作為一種化學品，我們需要非常注意包裝、儲存和運輸，因為它也直接影響到產品的質量是否完好，受到影響。那么要如何來包裝儲運呢？

We know that potassium hydroxide is widely used, but as a chemical, we need to pay great attention to packaging, storage and transportation, because it also directly affects the integrity of product quality. So how to package, store and transport?

包裝儲運：氫氧化鉀一般采用25kg三層塑料編織袋，內外層為塑料編織袋，中層為塑料內膜袋。氫氧化鉀應該在通風干燥的庫房或棚屋。包裝容器應完整、密封。不要與易燃品和酸類一起儲存和運輸。運輸過程中注意防潮防雨。發生火災時，可用水、沙子及各種滅火器滅火，但消防人員應注意水中溶解的燒堿的腐蝕性。

Packaging, storage and transportation: 25kg three-layer plastic woven bags are generally used for potassium hydroxide, the inner and outer layers are plastic woven bags, and the middle layer is plastic inner membrane bags. Potassium hydroxide should be stored in a ventilated and dry warehouse or shed. The packaging container shall be complete and sealed. Do not store and transport with inflammables and acids. Pay attention to moisture and rain during transportation. In case of fire, water, sand and various fire extinguishers can be used to put out the fire, but firefighters should pay attention to the corrosivity of caustic soda dissolved in water.

固體氫氧化鉀貯存：注意密封，防止暴露在空氣中吸潮、潮解或與二氧化碳接觸。在玻璃瓶中盛放氫氧化鉀或其他形式的氫氧化鉀時，不宜使用玻璃塞，而應使用橡膠塞，因為氫氧化鉀與玻璃中的二氧化硅反應生成硅酸鈉，使塞與塞之間的鍵合而且瓶子很難打開。

Storage of solid potassium hydroxide: pay attention to sealing to prevent moisture absorption, deliquescence or contact with carbon dioxide when exposed to air. When potassium hydroxide or other forms of potassium hydroxide are contained in the glass bottle, the glass plug should not be used, but the rubber plug should be used, because the potassium hydroxide reacts with the silica in the glass to form sodium silicate, which makes the bond between the plug and the plug, and it is difficult to open the bottle.

工業氫氧化鉀雖然應用廣泛，但其理化性質具有一些不適合密切接觸的性質和化學性質，如腐蝕性等。因此，切記按照執行標準和規范進行包裝、儲存和運輸安排，以確保不發生泄漏事故、人身傷害和經濟損失。

Although industrial potassium hydroxide is widely used, its physical and chemical properties have some properties that are not suitable for close contact and chemical properties, such as corrosivity. Therefore, remember to make packaging, storage and transportation arrangements in accordance with the Executive Standards and specifications to ensure that leakage accidents, personal injuries and economic losses do not occur.

此外，氫氧化鉀具有很強的腐蝕性，但可用于不同的場合，應用范圍很廣。對員工的要求不只體現在生產過程中，而且在生產之后，對包裝員工也有一些詳細的要求。比如：

In addition, potassium hydroxide has strong corrosivity, but it can be used in different occasions and has a wide range of applications. The requirements for employees are not only reflected in the production process, but also after production, there are some detailed requirements for packaging employees. For example:

工作前穿戴勞動防護用品；先檢查縫紉機工作是否正常；將袋子放入工作區；打開電子泵電源開關；開始包裝，將氫氧化鉀借入包裝袋，用縫紉機將包裝出口密封；將包裝好的氫氧化鉀放入倉庫，依次放置自然冷卻。澆筑時，應根據氫氧化鉀的顏色進行澆筑。等等。

Wear labor protection articles before work; First check whether the sewing machine works normally; Put the bag into the work area; Turn on the power switch of the electronic pump; Start packaging, borrow potassium hydroxide into the packaging bag, and seal the packaging outlet with a sewing machine; Put the packed potassium hydroxide into the warehouse and place it in turn for natural cooling. When pouring, it shall be poured according to the color of potassium hydroxide. wait.

安排工業氫氧化鉀的包裝儲運要注重的相關事項便是這樣了，如果您對此有什么要講的可以關注網站www.fahao168.com來聯系我們分享交流。

This is what should be paid attention to when arranging the packaging, storage and transportation of industrial potassium hydroxide. If you have anything to say about it, you can pay attention to the website www.jinhao360 Com to contact us to share and exchange.